SIPA SFR 8 Blow Moulder (2009)

Overview

This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour.

The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production.

Technical data

• Manufacturer: SIPA (Italy)
• Model: SFR 8
• Year of manufacture: 2009
• Machine type: rotary stretch-blow moulder for PET bottles
• Number of cavities: 8
• Output: up to 12,400 bottles/hour
• Bottle formats: 0.5 l, 0.75 l and 1.5 l
• Neck finish: 28 mm / 1881 (short neck)
• Electrical connection: 400 V, three-phase
• Total connected load: 147 kW
• Location: Germany

Included in the sale

• Four sets of blow moulds with eight cavities each: two sets for 1.5 l, one for 0.75 l and one for 0.5 l
• Preform feeding system
• Chiller
• Machine-mounted touchscreen control panel
• Full safety enclosure with viewing windows

Not included

• Preform hopper (can be custom-made)
• High-pressure compressor

Condition

The machine is in very good condition and has been maintained regularly by the manufacturer. It is still installed and under power and remains in regular production, so it can be inspected in operation on site.

Availability

The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 10 and 14 October 2026 and can be carried out by the seller. The machine is located in Germany.